Yamaha BANSHEE Service Manual download pdf

MSD POWERSPORTS • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 858-3365 • FAX (915) 858-3496

Parts Included:

1 - Programmable Enhancer Ignition, PN 05-09-2615/PN 4204

Parts Required: (Not Included)

1 - MSD 7.2 Volt NiCad Fast Charger (1 Hour),

PN 00-00-1530/PN 4385

1 - Clutch Lever Micro Switch for Holeshot Feature

1 - MSD Coil Assembly, PN 30-00-3010/PN 4294

1 - Ignition Mounting Brackets, PN 15-04-0530/PN 4393

1 - MSD 7.2 Volt NiCad Battery, PN 00-00-2625/PN 4381

1 - Battery Mounting Bracket, PN 00-00-2626/PN 43811

Note: It is recommended that you have the

factory service manual while performing this

installation.

MSD Enhancer Ignition

for the Yamaha Banshee

PN 05-09-2615/PN 4204

TECHNICAL INFORMATION

Spark Output: The MSD Enhancer Ignition System for the Yamaha Banshee produces a high

output spark that is approximately double the stock spark output. This increased spark energy

allows the use of richer fuel mixtures or even exotic fuel such as alcohol. The MSD Enhancer

Ignition will put out approximately 30,000 volts to the spark plug.

Spark Plugs: With the MSD Enhancer, it is recommended to use as cold a spark plug as possible

while still being able to start the engine easily. The spark plug gap will largely depend on the

compression of the engine. The higher the compression the smaller the plug gap you must run. A

good rule of thumb for the spark plug gap is between .032” and .036”. Taking the time to test with

different gaps will give you the best gap for your application.

MSD Coil and Spark Plug Wires: The MSD Coil features low resistance (0.2 Ohms Primary, 2K

Ohms Secondary) with a turns ratio of 70:1 for maximum spark voltage and energy. The MSD

8.5mm Super Conductor Spark Plug Wires are very low resistance (less than 50 Ohms per foot) for

maximum voltage carrying capabilites. Even with this low resistance, the wire still suppresses EMI

(Electro Magnetic Interference) from disrupting the electronics of the ignition. This is the only wire

recommended to be used with the MSD Enhancer Ignition System.

Adjustable Ignition Timing Curve: The MSD Enhancer Ignition system allows you to program an

ignition timing curve. Changes in altitude, compression, fuel octane or a number of other variables

requires that the ignition timing be compensated. The MSD Enhancer allows you to advance or

retard the initial timing as well as designate a different timing curve to increase overall power and

performance.

Holeshot Feature: The feature allows the user to program an rpm-limit, which enables the rider to

leave the starting line quicker.

Rev Limiter: The MSD Enhancer does not have an adjustable rev limiter. The Ignition will not turn

over 13,500 rpm.

Tools Required

#3 Phillips Screwdriver

3/8” Ratchet

10mm Socket

10mm Open End Wrench

Optional PN 05-09-4214/PN 4214

Charging Circut

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - MSD Enhancer Ignition

MSD POWERSPORTS • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 858-3365 • FAX (915) 858-3496Parts Included:1 - Programmable Enhancer Ignition,

Page 2 - INSTALLATION

7.2 Volt NiCad Battery: The MSDEnhancer Ignition System dependson a 7.2 volt battery source to supplypower to the complex adjustable tim-ing feature.

Page 3 - INSTALLATION INSTRUCTIONS 3

INSTALLATION INSTRUCTIONS 3Figure 4 Connecting the MSD Kill Switch (White Wire).Figure 5 Mounting the NiCad Battery.3. Plug these two connectors toget

Page 4 - PROGRAMMING

4 INSTALLATION INSTRUCTIONSMSD POWERSPORTS • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 858-3365 • FAX (915) 858-3496PROGRAMMINGOne of the m

Page 5 - INSTALLATION INSTRUCTIONS 5

INSTALLATION INSTRUCTIONS 5MSD POWERSPORTS • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 858-3365 • FAX (915) 858-3496Figure 7 Max Speed Reta

Page 6 - TECH NOTES

6 INSTALLATION INSTRUCTIONSMSD POWERSPORTS • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 858-3365 • FAX (915) 858-3496TECH NOTES_____________

Page 7

INSTALLATION INSTRUCTIONS 7MSD POWERSPORTS • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 858-3365 • FAX (915) 858-3496TECH NOTES_____________

Page 8

ServiceIn case of malfunction, this component will be repaired free of charge according to the terms of the warranty. Whenreturning components for se

Comments to this Manuals

No comments

Yamaha BANSHEE Service Manual

Browse online or download Service Manual for Motorcycles Yamaha BANSHEE. Yamaha BANSHEE Service manual User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Motorcycles Yamaha BANSHEE