Yamaha CDR-HD1000 Owner's Manual Page 48

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 47
E-44
8. Press the MULTI JOG knob (ENTER on the remote
control) to repeatedly play the passage between the
beginning of the track and a point that is several
seconds after the end of the fade-in to be added as
set in step 7.
Go to the next step, if the fade-in length is set appropriately. If
not, continue setting by repeating steps 7 and 8.
9. Press COMPLETE.
The fade-in is added to the beginning of the selected track for
the selected length.
Notes
To cancel the fade-in that has been added, press CLEAR in step 7
to clear the fade-in length, and then press COMPLETE.
Fade-in cannot be added to a track that is shorter than 21 seconds.
The fade-in effect becomes ineffective if the following editing is
performed to the track which the fade-in is added to.
1. Erasing a certain part of the track (Part Erase).
2. Combining the track (Track Combine).
3. Dividing the track (Track Divide).
4. Adjusting the beginning of the track (Track Adjust).
Add Fade Out
You can add fade-out at the end of a track. The end of the track is
played with gradually lowering the level when fade-out has been
added.
1. Select and confirm Add Fade Out in step 5 for
TRACK EDITING on page 37.
The following message appears on the display.
The disc number that contains the track to add fade-out flashes.
2. Select the disc that contains the track to add fade-out
by rotating the MULTI JOG knob (pressing +/ on the
remote control).
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc that contains the track to
add fade-out.
The number of the track to add fade-out flashes.
4. Select the track to add fade-out by rotating the MULTI
JOG knob (pressing +/ on the remote control).
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track to add fade-out.
6. Press w/d (w on the remote control) to play the track
to add fade-out.
Fd.Out and the fade-out length alternately appear on the
display.
7. Set the fade-out length by rotating the MULTI JOG
knob (pressing +/ on the remote control).
The fade-out length can be set in the 1 to 10 second range by 1
second increments.
8. Press the MULTI JOG knob (ENTER on the remote
control) to repeatedly play the passage between a
point that is several seconds before the beginning of
the fade-out to be added as set in step 7 and the end
of the track.
Go to the next step, if the fade-out length is set appropriately. If
not, continue setting by repeating steps 7 and 8.
9. Press COMPLETE.
The fade-out is added to the end of the selected track for the
selected length.
Notes
To cancel the fade-out that has been added, press CLEAR in step
7 to clear the fade-out length, and then press COMPLETE.
Fade-out cannot be added to a track that is shorter than 21
seconds.
The fade-out effect becomes ineffective if the following editing is
performed to the track which the fade-out is added to.
1. Erasing a certain part of the track (Part Erase).
2. Combining the track (Track Combine).
3. Dividing the track (Track Divide).
4. Adjusting the beginning of the track (Track Adjust).
TRACK EDITING
GROUP
L
R
dB 30 10 6 20
Fd.Out 001 1?
Disc that contains the track to add fade-out
Track to add fade-out
L
R
dB 30 10 6 20
Fd.Out 450
L
R
dB 30 10 6 20
Time: 3 451
Page view 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 69 70

Comments to this Manuals

No comments