Yamaha CDR-HD1000 Owner's Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
E-30
ADVANCED COPYING OPERATION
4. Adjust the parameter for each item by rotating the
MULTI JOG knob (pressing +/ on the remote
control).
See the further steps for detailed instructions on parameter
adjustment for each item.
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the setting when adjustment has
been completed.
6. Press MENU to close the menu.
This unit returns to the copy standby mode.
Note
The settings for Copy Method and Copy Speed are stored in
the memory and apply to future copying.
Copy Method
Setting of the copying method. Copying may fail if the setting for
Copy Method is not correctly made.
<When copying from a CD onto the HDD>
Initial setting: Digital Copy
Digital Copy
This method always makes digital copies. Copying is not
possible if the tracks are copy protected by the SCMS standard
(see page 11).
Auto Dig/Anlg
Digital and analog copying are automatically switched
depending on the track. If digital copying is prohibited by the
SCMS standard (see page 11), an analog copy is made. For
those tracks that can be digitally copied, a digital copy is made.
Analog Copy
This method always makes analog copies.
<Copying from the HDD onto a CD-R or CD-RW disc>
Initial setting: Analog Copy
Analog Copy
This method always makes analog copies.
Digital Move
The data is moved from the HDD to the CD. Therefore, the
track or group data will be deleted from the HDD after they
have been moved to the CD-R or CD-RW disc by this method.
Auto Dig/Anlg
Digital and analog copying are automatically switched
depending on the track. If digital copying is prohibited by the
SCMS standard (see page 11), an analog copy is made. For
those tracks that can be digitally copied, a digital copy is made.
Note
In analog copying, the data may be copied at a lower sound level.
Copy Level
Setting of the sound level for copying. Sound level adjustment is
not normally necessary. However it is possible to adjust the copying
sound level to suit you needs.
The following message appears on the display when Copy Level
setting is confirmed in step 3 for Copying Menu Setting on page
29.
1. Adjust the copying sound level by rotating the MULTI
JOG knob (+/ on the remote control).
Adjustment is possible in the 12dB to +12dB range by 0.4dB
steps. When the level is set to a value other than 0dB, the VAR
indicator lights on the display.
2. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the copying level setting.
Notes
Level adjustment is not possible during copying.
If the red part on the peak level meter lights at the loudest sound
levels, stop copying to adjust the copying level, and then resume
copying.
Copy Speed
Setting of the copying speed.
Initial setting: Best Effort
Best Effort
Copying is done at the highest speed possible depending on the
Copy Method setting and the disc condition.
When Digital Copy is selected: 10x speed
When Auto Dig/Anlg is selected: 2x speed
When Digital Move is selected: 8x speed (for a CD-R disc),
4x speed (for a CD-RW disc)
When Analog Copy is selected: 2x speed
1x Copy
Copying is always made at 1x speed despite the Copy
Method setting.
2x Copy
Copying is always made at 2x speed despite the Copy
Method setting.
Notes
If there are scratches or dust on the disc, the copy speed may drop
automatically even when Best Effort is selected.
Select 2x copy or 1x copy when copying onto a CD-R or CD-
RW disc that does not support high-speed copying.
REC
LEVEL
L
R
dB 30 10 6 20
Level 0.0dB
GROUP
VAR
CDRW
L
R
dB 30 10 6 20
GROUP
VAR
CDRW
L
R
dB 30 10 6 20
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 69 70

Comments to this Manuals

No comments